Qualifications Of Personnel - Ega Master 51648 Instrucciones De Montaje

Never put your hand between the fastening plate and the unit housing during operation.
Install the unit only according to the drawings provided in these installation instructions.
Ensure that a danger symbol for crushing injuries is attached to the sides of the frame during
installation. The unit may only be operated if the danger symbols are easily recognisable.
Risk of injury at rotating parts due to limbs being pulled in.
Never touch rotating parts. Wear close-fitting work clothing. Do not wear any loose jewellery.
Cover long hair with a hair net.
Fractures may occur if the emergency release is released by force.
Release the emergency release only in accordance with the information provided in these
installation instructions.
Severe injuries due to parts under spring tension when dismantling the unit.
Do not dismantle the unit under any circumstances.
Risk of burns due to contact with a hot surface. Excessive heat may build up on the unit
during operation.
Avoid contact with the drive unit, particularly with the driving motor..
Avoiding the risk of slight injuries
Cuts may be sustained on sharp edges on the device. Wear protective gloves during all work
on the device.
Crushing is possible when actuating the emergency release.
Only actuate the emergency release according to the notices in these installation instruc-
tions. Wear sturdy protective gloves when testing the functioning of the emergency release.
Crushing may be caused if the device collides with persons. During operation, ensure that
no persons remain in the carriage's direction of travel.
Avoiding damage to property and malfunctions
Damage to property is possible when an unsuitable control unit is used.
Only use control units that have been approved by the manufacturer for use with this device.
Damage to property may be caused when the cable of the control unit is not fastened.
Ensure that the cable of the control unit is securely fastened to the carriage.
A malfunction may be caused by the plug on the control unit becoming loose.
Secure the plug after connecting the device with two hexagon socket head screws in the
threaded holes intended for this purpose.
A malfunction may be caused by insufficient fastening. Tighten the screws fastening the de-
vice with the specified torque.
Damage and malfunctions may be caused by use outdoors. Soiling and wetness can affect
functioning and lead to the device being damaged.
Only use the device as intended.
Damage may be caused by unsuitable cleaning agent. Only use cleaning agent that does
not damage the construction material of the device. Please contact your sales partner for more
information.
Installation may only be performed by specialist personnel. The specialist personnel must
have knowledge and experience in the following areas:
Installation of carriages, for example hospital beds
Mounting additional electrical equipment onto carriages (specialist electricians)
Creating connections for the types of equipment used
All notices in these installation instructions and the included documents.

QUALIFICATIONS OF PERSONNEL

17