Magnat MULTIMEDIA 2100 DIGITAL Manual Del Usuario página 13

Operation with the system remote control (fig. 6):
ON/STBY (12): Switches the device on when it is in the standby mode. If the LED does not illuminate,
actuate the power switch located on the rear of the subwoofer. Conversely the device can be switched
from power operation to the standby mode.
MUTE (13): Switches the sound on and off.
VOLUME (14): Increases (+) or decreases (-) the volume.
SUB (15): Increases (+) / decreases (-) the volume of the subwoofer.
SOURCE (Input selector switch) (16): Switches between the different audio sources (LINE IN 1, LINE
IN 2, DIGITAL IN). The selected input is displayed via the LED on the IR receiver (green, purple or blue).
SERVICE AND TECHNICAL PROBLEMS
If you should encounter any technical problems, please contact your specialist dealer or
Magnat Audio-Produkte GmbH, Tel.: 02234807-0.
SPECIFICATIONS
Configuration:
Power handling capacity RMS / Max.:
Impedance:
Frequency range:
Cross-over frequency:
Efficiency (2.8 V/1 m):
Dimensions (WxHxD):
Weight:
Configuration:
Output power RMS/Max.:
Frequency range:
Cross-over frequency:
Dimensions (WxHxD):
Weight:
SUBJECT TO TECHNICAL CHANGE
Satellite speakers
Two-way
50/100 watts
4 – 8 ohm
90 – 32 000 Hz
5000 Hz
88 dB
90 x 110 x 110 mm
0.9 kg
Subwoofer
bass reflex, downfire
120/240 watts
28 – 200 Hz
150 Hz
235 x 400 x 380 mm
9 kg
13