Canyon CND-GPW3 Manual De Instrucciones página 5

SWITCH mode key layout:
Corresponds - key
Motion sensor can support switch host and use X Y Z axial to control the game
Channel LED indicator:
when the battery voltage is lower than 3.5 V, the connected channel LED(s) will
flash to indicate low power and turn off the vibration function.
Use the cable connection Settings:
1. On your Nintendo Switch,select the menu item»System Settings»----»Controllers
and sensors»----»Pro Controller wired Communication» to turn the wired
connection on.
2. Insert USB cable directly to the Nintendo switch charging dock.
3. When the channel LED stays on, the connection is successful.
Corresponding Turbo button
1. Default screenshot key on the host switch.
2. Switch host length video function.
3. Hold "R3" first +"Capture" button together,
to switch to TURBO key.
4. Press again, «R3 + Capture» button, to switch
«Capture» button.
Corresponds + key
Corresponds Y key
Corresponds X key
Corresponds A key
Corresponds B key