User Instructions; Wall Mounting (Optional) - EASYHOME EWCF8B Manual Del Usuario

_______

User instructions

1. Place the fan on a level and dry surface. Plug the power cord into a polarized
120V AC wall outlet.
2. Select the desired speed O (Off), L (Low), M (Medium), H (High).
3. Adjust the angle of the fan to the desired air output direction.
4. To move the fan, turn fan OFF and use concealed carrying handle on back of
fan.
Wall Mounting
1. Locate and mark a suitable position on the wall to mount the fan (preferably
at a wall stud).
2. Hold the fan against the wall at the location you would like it to be installed.
3. Use a pencil to mark the location of the mount opening screw holes on the
base of the fan. Place fan aside and drill pilot holes through the marks you
have made on the wall.
4. Insert anchors (not included) into the holes.
5. Place mount screws (not included) through the holes in the wall mount
openings, and then place the fan into position on the wall.
6. Tighten the screws until the wall mount is flush against the wall.
7. Once securely attached to the wall, the fan can be plugged into an electrical
outlet.
8
___
(optional)
__ User instructions