Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Air Circulator Fan_______
USER INSTRUCTIONS
1.
Place the fan on a level and dry surface. Plug the power cord into a polarized 120V AC
wall outlet.
2.
Select the desired speed（OFF）0, （High) H, (Medium) M, (Low) L.
3.
Adjust the angle of the fan to the desired air output direction.
4.
To move the fan, turn fan OFF and use concealed carrying handle on back of fan.
Wall Mounting (optional)
1.
Locate and mark a suitable position on the wall to mount the fan (preferably at a wall
stud).
2.
Hold the fan against the wall at the location you would like it to be installed.
3.
Use a pencil to mark the location of the mount opening screw holes on the base of the
fan. Place fan aside and drill pilot holes through the marks you have made on the wall.
4.
Insert anchors (not included) into the holes.
5.
Place mount screws (not included) through the holes in the wall mount openings, and
then place the fan into position on the wall.
6.
Tighten the screws until the wall mount is flush against the wall.
7.
Once securely attached to the wall, the fan can be plugged into an electrical outlet.
CLEANING AND MAINTENANCE
CAUTION: Always be sure that the appliance is switched OFF before cleaning the
appliance or attempting to store the item. DO NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
1.
Before cleaning, turn the fan off and unplug from electrical outlet.
2.
Wipe off excess dust with a lint free cloth.
3.
DO NOT immerse the fan in water and never allow the water to enter the motor
housing.
4.
DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
5.
DO NOT use abrasive cleaner to clean the fan.
AFTER SALES SUPPORT
888-367-7373
___
USER INSTRUCTIONS & CLEANING AND MAINTENANCE
customer-service@wk-usa.com
7
Publicidad
Tabla de contenido
