Beep Sound - Lidl Service WK5A3 Instrucciones De Uso

The selected number combination must now be entered every time
the camera is switched on before it can be operated.
If you forget the number combination, proceed as follows to unlock
the camera and to reset it to its factory default settings:
♦ Download the game camera software from the product support
page on www.kompernass.com.
♦ Unzip the file and copy the files "ISP_SD.bin" and
"Rom_CodeWK5A3.bin" onto a blank memory card.
♦ Insert the memory card into the device while the mode selector
switch is set to the OFF position.
18
♦ Keep the
switch to the TEST position. Keep the
until the display
Keep table".
♦ After around 25 seconds the camera switches off.
♦ Switch the camera back on by moving the mode selector switch
to the OFF position and then to the TEST position. The camera
can now be used without entering a password.
NOTICE
► This procedure will permanently delete any previously made
settings and return the device to the factory settings.

Beep sound

The device allows you to select whether or not you wish to hear an
audible signal (default setting) when you press a button.
WK 5 A3
button pressed while moving the mode selector
shows the notification "Firmware upgrading...
10
button pressed down
GB │ IE │
69 ■