Intended Use; Instructions Before Installation - Dometic S4 Instrucciones De Montaje Y De Uso

Intended use

4 Intended use
The S4 wall window is suitable for installing in caravans and motorhomes. It is
designed as a vent window or sliding window.
5

Instructions before installation

➤ Before installation, check the wall thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
➤ When choosing the installation location, observe the following:
– Adjoining components (attachment and reinforcing parts), cables and cabi-
nets in the vehicle interior must not get damaged when sawing the hole.
– Sufficient space needs to be available for installing the inner and outer frames.
– Only install the wall window on flat wall surfaces.
– Note that when installing the sliding window the movable window pane is at
the front in the direction of travel when closed.
5.1 Pressing out the hole
See fig. 2
5.2 Using the reinforcing rails
Supplementary to fig. 3
➤ Before installation, check whether the wall hole needs reinforcing.
➤ Remove the foam/insulation according to the width of your reinforcing rails (not
in scope of delivery) (A).
➤ Fit the reinforcing rails (B).
4
S4
EN