Opening And Closing Roller Blinds; Maintaining And Cleaning S4 - Dometic S4 Instrucciones De Montaje Y De Uso

S4
7.3

Opening and closing roller blinds

A
NOTICE! Risk of damage due to a build-up of heat between the
roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of the
way.
➤ Hold the blackout roller blind at the grip and pull it to the flyscreen (fig. b).
➤ Click the blackout roller blind onto the flyscreen.
➤ Select the required position by moving the two latched-roller blinds at the same
time and allow to latch into place (fig. c).
Opening the roller blind
➤ Move the roller blind so that the blackout roller blind is closed.
➤ Separate the roller blinds by pressing the pivot on the flyscreen.
➤ Guide the flyscreen back.
Do not let the roller blind spring back.
➤ Open the blackout roller blind by pressing together the two sliders at the side on
the grip. (fig. d)
8

Maintaining and cleaning S4

A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may dam-
age the acrylic glass.
Only use cleaning agents that are approved by the manufacturer.
Acrylic glass polish (ref. no. 9600000128), special polishing cloth
(ref. no. 9600000130) and acrylic glass cleaning agent
(ref no. 9600000129) or the cleaning set (item no. 9600000132).
➤ Clean the roller blind with mild soap and water.
➤ Put talcum powder on the rubber seal.
EN
Maintaining and cleaning S4
9