Price Pfister Wakely 34 Serie Manual Del Usuario página 5

18
18B
18 CARTRIDGE REMOVAL
Turn off water supplies and relieve pressure before working on your faucet (see step
2). Remove Handle (See step 17) Remove the Dome Cap (18A) by unscrewing it in a
counterclockwise direction. Using an adjustable wrench, unscrew the Retainer Ring
(18B). Carefully remove the Cartridge (18C) by pulling it straight up and out. Inspect
Cartridge (18C) for debris or damage. Clean or replace the Cartridge (18C). Reassemble
faucet by reversing steps.
19
19D
19 DIVERTER REMOVAL
If the side spray fails to work properly the diverter mechanism may be clogged with debris
or may need replacing. To check and/or replace Diverter (19A), shut off water supply
and relieve pressure before working on your faucet (see step 2). Remove handle (see
step 16) and Dome Cap (19B) and carefully lift up the Spout Assembly (19C). The Diverter
Mechanism (19A) is located on the backside of Inner Faucet Body (19D) Carefully remove
the Diverter Mechanism (19A) and check for debris. Clean or replace the Diverter Mechanism
(19A). Reassemble faucet by reversing steps.
ENGLISH
DISASSEMBLY
1.
18A
2.
3.
Cleaning Instructions:
18C
For all Handles and decorative finishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
19B
19C
19A
5
CAUTION: Maintenance
Replacement parts may be available at the store where you purchased
your faucet.
When replacement parts are not available, please write or call Price
Pfister Consumer Service.
Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information