Panasonic Viera TC-L42ET5W Instrucciones De Operación página 15

Setup the network connection
6
Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 56).
●
Please note that this TV does not support wireless public access points.
●
Ensure the network connections (p. 13) and network environment are completed before starting setup.
Select the network type
Network Setup
Select Wired or Wireless
Wired Wireless Set later
■
[Wired]
1. Select [Auto]
Acquire IP Address
Auto
select
access
2. Go to the next step
(Press twice)
■
[Wireless]
Access points found automatically are listed.
1. Select your desired access point
Available Wireless Networks
No. Network Name(SSID) Wireless type
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
●
To search access points again
2. Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:-
Network Name(SSID) : Access Point A
Security type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
3. Enter the encryption key of the access point (English only)
Wireless Network Settings
Encryption key
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z 0 1 2 3 4 5
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _ @ /
, ; = $ [ ] ~ < > { } | `
[Wired] "Wired connection" (p. 13)
[Wireless] "Wireless connection" (p. 13)
select
access
● To setup later on or skip this step
Select [Set later] or
Connection Test
Check network cable connection.
Check acquired IP address.
Manual
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Automatically setup is done and the test of the
network connection starts.
●
To set manually, select [Manual] and set each item.
For details (p. 59)
select
Status
access
: Encrypted access point
●
To set [WPS(Push button)]
●
If the selected access point is not encrypted, the confirmation screen will
be displayed. It is recommended to select the encrypted access point.
Set characters
select
6 7 8 9 ! : #
set
o p q r s t
" ' % & ?
● You can set characters by using numeric buttons.
^ \
: succeeded
The test is successful and the
TV is connected to the network.
: failed
Check the settings and
connections. And then select
[Retry].
● For the information of the
highlighted access point
●
(p. 16) To set manually
Store
(p. 81)
(p. 61)
15