User Instructions; Instructions For Outdoor Use - Holiday SL-4046-RC Manual Del Usuario

_______

User instructions

WARNING: LASER RADIATION. NEVER SHINE INTO EYES OR

Instructions for outdoor use

1. Remove all projection light components from the packaging.
2. Determine a location that is free from visual obstructions between the projection light and the
intended surface so the laser lights project clearly.
3. Insert lawn stake into the ground, approximately 3-4 inches, in the location desired.
Note: If you have difficulty inserting the stake into the ground, a rubber mallet may be used
(not included) to gently pound in the stake. Never attempt to push or pound the housing of the
projection light.
4. Gently push the housing of the projection light about half way into the opening of the stake. Do
not force it all the way in.
5. Loosen the thumbscrew and adjust the angle of the projection light housing, pointing at your
intended surface. Once pointed at intended surface, tighten the thumbscrew so the housing
will stay in place.
6. Attach an extension cord rated for outdoor use (not included) to the electrical plug on the
projection light. Plug the extension cord into a weatherproof outdoor electrical outlet.
7. Turn the projection light on by pressing the button located on the back of the projection light
housing. The remote may also be used by pressing the power button on the remote.
8. When using the button on the back of the projection light housing, continue to press through
color, flashing and/or fixed patterns to find desired pattern.
9. When using the remote, choose color, flashing and fixed patterns.
10. To turn off, press the button on the back of the projection light housing or the remote for two
seconds.
4
___
FACE. DO NOT STARE INTO BEAM!
_______ ___Assembly