Instructions For Indoor Use - Holiday SL-4046-RC Manual Del Usuario

_______

Instructions for indoor use

1.
Remove all projection light components from the packaging.
2.
Determine a location that is free from visual obstructions between the projection light and the
intended surface so the laser lights project clearly.
3.
Gently push the housing of the projection light into the flat base.
4.
Loosen the thumbscrew and adjust the angle of the projection light housing, pointing at your
intended surface. Once pointed at intended surface, tighten the thumbscrew so the housing
will stay in place.
5.
Attach an extension cord (not included) to the electrical plug on the projection light. Plug the
extension cord into an electrical outlet.
6.
Turn the projection light on by pressing the button located on the back of the projection light
housing. The remote may also be used by pressing the power button on the remote.
7.
When using the button on the back of the projection light housing, continue to press through
color, flashing and fixed patterns.
8.
When using the remote, choose color, flashing and/or fixed patterns
9.
To turn off, press the button on the back of the projection light housing or the remote for two
seconds.
LED Laser Projection Light has 9 modes:
1. Red and green light spinning
2. Red light spinning
3. Green light spinning
4. Red and green light flash alternately
5. Red and green light spin and flash
6. Red and green light spin and flash faster
7. Red and green light fixed
8. Red light fixed
9. Green light fixed
Remote control functions (unit must be turned on first)
•
Color: Press the left and right arrows to choose color and design mode
•
Flash: Press the left and right arrows to choose flash design mode
•
Timer: Press desired time from 1 hour up to 6 hours. The projector will blink twice and return
to previous function mode.
To activate the motion feature that includes a light sensor so it will only turn on
in the dark, peel off the sticker in the front of the housing that says "Peel this
off".
4
___ _______ ___Assembly