Carrier 50CO Instrucciones De Instalación, Funcionamiento Y Mantenimiento página 54

11 - TECHNICAL SPECIFICATIONS
Clamp
11.2.5 - Subbases:
Support subbase:
Adjustable feet
For supply air through a raised floor.
The height can be adjusted from 250 mm to a maximum of 610 mm. Adjustment screws are provided with the base for adjustment on
site. Do not forget to stick the adhesive seal provided to the aluminium frame of the base to ensure tightness.
Cased subbase with grille:
Double-deflection grids
Adjustable feet
Can be used either for intake or for supply air.
The height can be adjusted from 450 mm to a maximum of 860 mm. Adjustment screws are provided for adjustment on site. Do not
forget to stick the adhesive seal provided to the aluminium frame of the base to ensure its tightness.
Made up of double-deflection grids to direct the air flow.
Side hatch for pipe connection (hydraulic or refrigerant connection) + grommet for power supply cable.
54
Elbow
PVC tube
Grommet for power
supply cable connection
Plate for hydraulic connection