Operating Instructions; Setting Acooking Program - Danby DMW07A2SSDD Guía De Utilización Y Cuidado Para El Propietario

SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry. Check and try again.
SETTING THE
CLOCK
SETTING THE
TIMER
SETTING A
COOKING
PROGRAM
Use single digits to set a
cooking power level:
Cooking Power
Cooking Power 100%
Number Pad
Number Pad

OPERATING INSTRUCTIONS

1. Touch CLOCK pad.
2. Use the number pads to enter the correct time.
Note: This is a 12 hour clock. Only numbers between the range of 1:00-12:59 can
be set.
3. Touch CLOCK pad again.
NOTE:
When the oven is fi rst plugged in or when power resumes after a power interrup-
tion, the display will show ENTER CLOCK TIME. If you prefer not to have the clock
displayed, touch RESET.
You can check the clock time during cooking by touching the CLOCK pad.
1. Touch TIMER.
2. Enter the amount of time by touching the number pads (the maximum time is 99
minutes 99 seconds.)
3. Touch START/STOP.
NOTE:
Touch TIMER and then touch RESET to cancel TIMER during timing process.
A. One-stage Cooking
1. Use the number pads to set a cooking time. You can set a cooking time from one
second to 99 minutes and 99 seconds.
2. If you want to set a power level other than 100% power, touch POWER, then use
the number pads to enter the power level.
3. Touch START/STOP to start cooking.
B. Two-stage Cooking:
Some recipes require different stages of cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in "One-stage Cooking". DO NOT TOUCH START/STOP
2. SET STAGE 2:
Touch COOK then enter proper cooking time and (lower) power level. Most two-
stage recipes use lower power for the second stage.
3. Touch START/STOP.
NOTE:
• After total time has elapsed, 4 signals sound and END appears in the display.
Touch any pad or open the microwave oven door to clear END before starting an-
other cooking function.
90% 80%
1,0 9
70% 60%
8 7 6
10
50% 40% 30%
5 4 3
20% 10%
2 1