IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
• Ensure that component parts are replaced with like components and that servicing is done by factory
authorized service personnel, to minimize the risk of possible ignition due to incorrect parts or improper
service.
• Check the appliance for damage before using. If there is any damage to the appliance, do not use it,
return it to its point of purchase or contact consumer care.
• The appliance must be placed on a fl at, stable surface that is able to hold its weight and the heaviest
food likely to be placed in the appliance.
• Do not use this appliance where heat, moisture or high humidity are generated.
• Do not clean this appliance with or use near combustible materials.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is specifi cally designed to heat, cook or dry food. It is not designed for industrial or
laboratory use.
• Do not store or use this appliance outdoors. Do not use this appliance near water.
• Do not overcook food. Carefully watch the appliance when it is in use.
• Remove wire twist-ties before placing items in the appliance.
• Do not use the appliance for storage purposes. Do not leave items inside the appliance when not in use.
• Do not heat oil or fat for deep frying as it is diffi cult to control the temperature of oil in a microwave.
• Some items such as whole eggs or sealed containers have the possibility of exploding when heated and
should not be placed in this appliance.
• Do not operate any heating or cooking appliance beneath this appliance.
• Ensure that the glass tray and rollers are in the correct position before use to avoid possible spills.
• Do not operate this appliance when it is empty as this will increase the heat around the magnetron and
can damage the appliance or cause a fi re.
• If items inside the appliance should ignite, keep the door closed, turn the appliance off and disconnect
the power cord.
• Do not operate the appliance without the glass tray, roller support and shaft in their correct positions.
SAVE THESE INSTRUCTIONS!
2