Ventilation
Evacuate air from the system
If too much air or CO₂ has accumulated in the system, it must be deaerated:
- Remove the CO₂ cylinder.
- Draw some still water until a clear, straight stream of water is coming out of the
mixer tap.
- Now draw another 2 litres of still water.
- Draw some sparkling soda water until a clear, straight stream of water is coming
out of the mixer tap.
- Now draw another 2 litres of sparkling water.
- Reinsert the CO₂ cylinder.
- Draw sparkling water until the stream looks like the usual soda stream of sparkling
water once again.
- Your system is ready for operation once more.
If the system still isn't working properly after completing these steps, it can also be
completely emptied and deaerated. To do this, contact BLANCO Customer Service.
57