GRAFF AQUA-SENSE Instrucciones Para El Uso página 49

The environment customized to a user can be set by setting screen, sound, system, and product information can be seen.
Entering
ⓐ Pushing the User Setting Icon
ⓑ It returns to the Background Screen if the User Setting
Icon is pushed once again.
Screen setting
Information
Is there any problem with the product? Please check followings before requesting the Service.
Check list 1
Problem
Power is not supplied to controller
Controller operates normally,
but no water comes out.
IOG 5105.36.1
.
Screen saver
Brigthness
Background image
(Refer to page 22)
Internal
memory info.
268/1084MB
(Used/Total)
Operating
Android 2.3.3
system
serial number
XX.XX.XXXX
Specific situation
Is power connected to power supply?
Is the connection made from the
power supply to control box or
is the electric wire disconnected?
Is wall pad cable loose or discon-
nected?
Does circuit breaker pop out?
Is pipe connected from stop vavle
to control box?
Is hot and cold water supplied?
CONTROL TOUCH PANEL
Update
connect it to USB port and push "Update" button
Reset:
All user information will be initialized
System setting
(Ex:System setting memory/Shower memory)
Sound setting
Recommended action
Connect the power
After checking the connection from power supply
to control box,connect again if necessary.
Check cable connection of wall pad connect again,
if you necessary.
Cleane cable connection of wall pad and connect again,
if you necessary.Push in circuit bleaker
Clean entering water filter at pipe connected to
control box(refer to page 34)
Supply water to the pipe connected to control bax.
10
U ser setting
:Copy a update file to a USB memory and
12 : 05 PM
T roub l e sh ooting
Rev. 2 March 2012
Auto reboot
(To protect overload)
Temperature unit
Update/Reset
Stereo adjustment
(Left & Right speaker)
Volume
(System sound)
Sound effects On/Off