Casals VMP800M Manual Del Usuario página 3

English
Rotary hammer
VMP800M
Dear Customer,
Many thanks for trusting to Casals. Thanks to
its continuous effort, our innovation and the
strictest quality controls, Casals develops
electric Power Tools for the toughest jobs.
GENERAL POWER TOOLS
SAFETY WARNING
WARNING Read all safety warnings
and all instructions, illustrations and
specifications provided with this power
tool.. Failure to follow all instructions listed
below may result in electric shock, fire and/
or serious injury
Save all warnings and instructions for
future reference
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool
Work Area Safety
- Keep work area clean and well lit.
Cluttered or dark areas invite accidents
- Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes
- Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control
Electrical safety
- Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock
- Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded
- Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock
- Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock
- When operating the power tool
outdoors, use an extension cord suitable
for outdoor use. Use a cord suitable for
outdoor use reduces the risk of electric
shock
- If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock
Personal safety
- Stay alert, watch what you are doing
and use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury
- Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriated conditions will reduce
personal injuries.
ORIGINAL instructions
3