Easy Home HTJ-2108-USW Manual Del Usuario página 12

Safety
− Never place the product on or near hot surfaces
(hotplates, etc.).
− Ensure that the power cord does not come into contact
with hot parts.
− Never expose the product to high temperatures (heaters,
etc.) or to the effects of the weather (rain, etc.).
− Do not expose the product to direct sunlight or hot
circulating air.
− Do not use the product with ambient temperatures below
32 °F (0 °C). If the water in the water tank is frozen, wait
until it has melted.
− If the room temperature is below 32 °F (0°C), empty the
water tank. Freezing water can damage the product.
− Never fill the water tank with water that is above 104 °F
(40 °C) to prevent discoloration or deformation.
− Only put water in the water tank; never put water in the
other parts of the product.
− Never put water into the product's vapor discharge
opening or vapor discharge channel. Wipe wet areas on
the product with a dry cloth.
− Do not put any metals, chemicals, or cleaning agents in
the water tank. Otherwise, humidification will not work
properly.
− Never remove residual water from the steam pipe when
the product is switched on. This can destroy the sensor.
− Do not move the product around too much if there is a lot
of water in the water tank. Otherwise, water may leak and
get into other parts of the product.
− Never attempt to clean the product by immersing it in
water, and do not use a steam cleaner to clean it.
Otherwise, the product could be damaged.
− Do not in any case place the product in the dishwasher. It
would be destroyed as a result.
12