Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Put the water tank with the vapor absorption unit
onto the control unit.
Connecting the product to power
− Connect the product to a power outlet.
Switching the product on and off
The product has three levels of humidification. Press the power touch key
change the level of humidification. Based on the level selected, the power touch
key will illuminate a certain color.
Color
Level of humidification
Red
High
Yellow
Medium
Green
Low
1. Press the power touch key to switch the product on.
The power touch key illuminates red.
2. To select a different level of humidification, press the power touch key again
until it illuminates the desired color.
3. To switch the product off, press the power touch key again until it stops
illuminating.
Switching the bottom illumination on and off
The product has blue-colored LED bottom illumination on the bottom of the
4
control unit
1. Press the light touch key
button illuminates blue.
2. Press the light touch key again to switch off the bottom illumination.
Refilling with water
The integrated safety mechanism automatically stops the
humidification process when there is no water in the water tank. The
power touch key
from the vapor discharge opening
1. To use the product again, pull the power plug
and fill the water tank
2. Insert the power plug into the power outlet and switch on the product (see
chapter "Switching the product on and off").
(see Fig. G).
6
5
flashes red and vapor is no longer released
with water (see chapter "Filling with water").
2
to switch on the bottom illumination
(see Fig. D).
14
17
facing downward
out of the power outlet
7
Operation
5
to
. The
18
15
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
