TYROLIT Hydrostress FSD1274 Serie Instrucciones De Servicio página 44

TYROLIT Hydrostress AG
7.8 Lowering / raising saw blade
7.8.1
Page 18
Lowering example
1. Press the Lower button (1) until the saw blade touches the material to be cut.
2. Set the cutting depth indicator (2) in the 0 position.
3. Using the Lower key, lower the saw blade to the desired cutting depth.
4. Button depth stop (3) min. press forward for 3 seconds. Light (4) comes on.
5. The lowering speed can be controlled using the control valve (5).
In order to deactivate the stored cutting depths, gently raised the saw blade and move back flip
switch (3).
Floor Saw FSD1274