TYROLIT Hydrostress FSD1274 Serie Instrucciones De Servicio página 45

7.9 Adjusting the feed
Floor Saw FSD1274
Symbol
Feed adjuster is in the neutral position
Brake is released
1. Place coupling lever (1) in the coupled position.
Important: Only engage coupling at low engine speed (blade speed)
2. Using the feed adjuster (2). Set the direction of travel and speed.
Significance
Coupling lever in coupled position
Coupling lever in uncoupled position
Feed adjuster in the forwards direction of travel
Feed adjuster in the backwards direction of travel
TYROLIT Hydrostress AG
Page 19