TYROLIT Hydrostress FSD1274 Serie Instrucciones De Servicio página 47

8 Maintenance
8.1 Grease nipples
Floor Saw FSD1274
When?
Daily
Weekly
Every 50 hours of operation
Annually or every 100 operating hours
According to the information from the motor
manufacturer
Position of grease nipples
1 Bearing lifting shaft
2 Cylinder eye
3 Bearing wheel drive
TYROLIT Hydrostress AG
What?
► Check oil level.
► Perform a visual check for damage.
► Check belt tension and adjust if necessary.
► Lubricate grease nipples.
► Arrange a major service by TYROLIT
Hydrostress AG or an authorised
representative.
► Carry out all necessary measures in
accordance with the operating instructions of
the motor manufacturer.
Page 21