Proxxon OZI/E Manual De Instrucciones página 8

Translation of the Original
GB
Operating Instructions
PROXXON - OZI/E
Dear customer!
Always keep these operating instructions and the
enclosed safety guidelines within reach.
Only use this device with exact knowledge of it and
comply with the instructions and safety guidelines!
This is necessary to ensure safe operation and,
secondly, it simplifies familiarisation with the
device and its functions.
Proxxon assumes no liability for the safe function of
the device in the case of:
• handling that does not comply with normal
intended use,
• use for other purposes not mentioned in the
manual,
• incorrectly executed repairs,
• failure to heed safety instructions,
• external influences for which the manufacturer
is not responsible
We recommend using PROXXON original spare
parts for all repair and maintenance work.
Repairs should only be performed by qualified
skilled personnel!
Please note: All information contained in these
operating instructions - especially the technical
data - corresponds to the status at the time of
printing.
We reserve the right to make further developments
in the interest of technical progress. We wish you
every success with the device.
WARNING!
Read all safety warnings and instruc-
tions. Failure to follow all safety warn-
- 8 -
ings and instructions listed below may result in
electric shock, fire and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS
FOR THE FUTURE !
Legend
1. Grinding pad
2. Screw
3. Speed adjust button
4. ON/OFF switch
5. Hoop
6. Connection cable with power plug
7. Vent slits
Machine description
The PROXXON MICROMOT OZI/E corner grinder is
ideal for grinding difficult-to-reach areas, such as
corners, edges, joints and cavities. Thanks to the
oscillating grinding plate (Fig. 2), better grinding
results are achieved than are possible using corner
grinders that operate with eccentric action. Addi-
tional attach-ments can be fitted, such as circular
saw blades or diamond cutting blades to disaggre-
gate the most disparate materials in inaccessible
areas.
This machine features:
• Housing crown made of diecast aluminium for
precision ball bearing fit and increased durability
under extreme loads.
• Quiet-running, enclosed ventilated 5-pole full-
wave electronic motor (5,000 to 10,000 rpm).
• Grinding pad with velcro facing for quick replace-
ment of grinding wheels.
Technical data
Motor:
Voltage
Power consumption
Short-time operation
Rotational speed
230 V ~
80 Watt
KB 5 min
5,000 to