MASTER AUDIO DESIGN TSL DIGITAL Manual Del Usuario página 36

After doing this, the programs are stored in the clock's RAM memory, which
keeps the information thanks to the battery.
2. Updating an existing configuration
Whenever it is necessary to review or modify the TSL current configuration, the
same procedure as explained in the previous sections should be followed for
the options Change Language, Clock Setup and Adjust Levels. For the "Setup
Program" option there are some particularities to take into account.
Weekly program: To review the weekly program, first of all the corresponding
menu will be entered. Once there, the
programs, from 0 to 6. When needed, the begin time for the intervals can be
changed. To finish with the modification, press at any time the
seconds.
Bypass Dates: After a Bypass Date has been set, it can be reviewed, modified
or erased. To do this, access the Bypass Dates menu and select the date
number to be reviewed (0 to 9).
In the following example, the Bypass Date 1 has been previously programmed
and now must be modified. When entering in "Bypass Date 1", since this is an
already programmed event, the current settings will be displayed on the screen
in three steps: year (or repeat), "On" date and "Off" date. To go through this
information just press
Bypass Date
On: 20/03 10:00
In these steps it is not possible to modify any value, and so any of them will
blink. After that the user will be prompted for editing the current settings:
Answering "Y" will lead the user to the process described previously to set a
Bypass Date. If the answer is "N", the chance of deleting the bypass date is
given to the user:
.
Bypass Date
Year:Repeat
1 Bypass Date
Off: 01/04 22:00
Bypass Date
Modify(Y/N):N
Bypass Date
Delete(Y/N):N
35
key allows to go through the daily
1
1
1
1
key during 3