Combined Function Module (In/Out); Analogue Output Function Module - meibes Rossweiner heatsonic Manual Del Usuario

7. Erweiterungsmodule
• Output 2: f ≤ 200 Hz Pulse duration/pulse pause ~1:1
• Pulse width: ≥ 5 ms
• The volume pulse weighting can be freely programmed
• Standard: last digit in the display
7.5 Combined function module (IN /OUT)
The combined module has 2 inputs and 1 output.
See chapter 7.3 for the specific
characteristics on the pulse input.
The pulse output is specified
as pulse output 1 under point 7.4,
not however galvanically isolated.

7.6 Analogue output function module

The module is equipped with 2 passive analogue outputs, which can be freely programmed using the
IZAR@MOBILE 2 software. On the terminal strip, the electrically isolated outputs "1" and "2" are marked
and the polarity is indicated ("+" and "-").
42
Energy
external
meter
Pulse
output
module
V
CC
Pulse
GND