Testboy TB-2200 Instrucciones De Empleo página 20

Replace screws and screw tight.
6. 5 years warranty (60 months)
®
Testboy instruments are subject to strict quality controls. The instrument is
covered by a warranty for a period of 60 months against the functions developing
faults during the course your daily work (valid only with invoice). We will rectify
production or material defects free of charge upon return if these have not been
caused by misuse or abuse. Damage resulting from a fall or improper handling is
excluded from the warranty. Should faults affecting the functioning of the device
occur once the warranty has elapsed, our technical service will carry out the
necessary repairs without delay
This operation manual has been created with due care and attention. No claim is
made nor a guarantee given that the data, illustrations and drawings are complete
or correct. Subject to change without notice.
Certificate of quality
Testboy GmbH confirms that the purchased product has been calibrated during the
manufacturing process in accordance with the specified inspection instructions. All
aspects of the activities carried out by 'Testboy GmbH' relating to quality during the
manufacturing process are monitored permanently within the framework of a
Quality Management System in accordance with ISO 9001-2008.
Further, Testboy GmbH also confirms that the testing equipment and instruments
used during the calibration process are also subject to permanent inspection.
Declaration of conformity
This product fulfils the specifications contained in the Low Voltage Directive
2006/95/EC and EC Directive 2004/108/EC.
Fields of application
This instrument is intended for use in applications described in the operation
manual only. Any other use is considered improper and non-approved usage and
can result in accidents or the destruction of the instrument. Any misuse will result in
the expiry of all guarantee and warranty claims on the part of the operator against
the manufacturer.
- 20 -