KTM Power Parts 60714910133 Manual De Usuario página 13

- Connect wiring harness
NOTE
The cables have an adhesive label marked with ACC 2.
- Route the cable without tension and secure with cable ties
(included).
- Route cable for right fog light as shown.
- Join plug-in connector .
Installing the mask spoiler
- Position right mask spoiler.
- Join plug-in connector .
- Position holding lug in the hole and press the mask spoiler in the
mountings.
NOTE
Ensure that the turn signal cable is routed correctly.
Ensure that the intake snorkel is seated properly.
- Mount screw with bushing and tighten to 4 Nm.
- Mount screw and tighten to 3.5 Nm.
with ACC2 of the vehicle wiring harness.
13