Dyna-Glo DGB515SDP Manual De Instrucciones página 10

ASSEMBLY INSTRUCTIONS
7. Assemble the hood handle (A) to the
hood with two wingnuts (FF) and two spring
washers (GG) and two M6 washers (HH).
Hardware Used
FF
M6 Wingnut
GG M6 Spring Washer
M6 Washer
HH
8. Assemble the temp gauge (B) onto the hood.
Please use the washer and wing nut
pre-assembled with temp gauge to install the
temp gauge (B) onto the hood.
7
x 2
x 2
x 2
8
10
A
HH
GG
FF
B