GB
Overload indicator (red)
NOTICE:
- Under normal operating conditions, the output indicator light (green) will be ON.
- If the generator is overloaded (in excess 1000W), or if there is a short circuit in a connected device,
the overload indicator light (red) will go ON.
- If the oil level falls below a safe limit, the low oil indicator light (red) comes on and the engine will be
automatically stopped. If the engine stops or the low oil indicator light comes on when you pull the
starter grip, check the engine oil level before troubleshooting in other areas. (Refer to Fig. 4.12 for
CI 1000 and Fig. 4.13 for CI 2000 / CI 3000).
Overload indicator (red)
60
Output indicator (green)
Fig. 4.11
Output indicator (green)
Oil alarm indicator (red)
Fig. 4.12
Plug
Overload indicator (red)
AC circuit
protector
Oil alarm indicator (red)
Output indicator (green)
Fig. 4.13