37. Use a trim stick to remove the two fastener covers
at the grab handle. Remove two (2) fasteners from
the grab handle and remove the grab handle from the
B-pillar. Remove the seat belt turning loop cover and
remove the turning loop bolt. Use a trim stick to
release all retaining clips and remove the trim panel
from the B-pillar. Remove the seat belt from the trim
panel and remove the panel from the vehicle.
38. Use a trim stick to remove the seat belt turning loop
cover. Remove the turning loop bolt. Remove the
lower seatbelt anchor bolt. Release the lower and
upper trim panel retaining clips. Remove the lower
and upper trim panels from the vehicle.
39. Use a trim stick to remove the seat belt turning loop
cover. Remove the turning loop bolt. Remove the
lower seatbelt anchor bolt. Release the lower and
upper trim panel retaining clips. Remove the lower
and upper trim panels from the vehicle.
7/28/15
13