Publicidad
Idiomas disponibles
Idiomas disponibles
8
17. Locate Pin 11 on the connector.
18. Insert the tab wire connector from switch harness (B)
into Pin 11 on the connector.
19. Reinstall the outer casing and plug the connector
back into the BCM.
20.
, reverse steps 12 - 14 to reinstall the
audio amplifier.
21. Bundle and stow any excess harness under the dash
with cable ties. Reconnect the data link connector
and hood release latch and reinstall the trim panel
under the steering wheel. Reinstall two (2) fasteners
under the bottom edge of the panel.
7/28/15
Publicidad
