Publicidad
Idiomas disponibles
Idiomas disponibles
2
Obtain 4-digit PIN number from authorized dealership personnel.
1. Log on to https://dealerconnect.chrysler.com.
2. In the "Service tab"-"Warranty Administration" box -"Vehicle Option Updates" screen, enter the vehicle VIN and add
the sales code XBM (Remote start) as a "Dealer Installed Option".
3. Confirm that the new sales code has been successfully added to the VIN.
1. With the WiTech tool connected to both the internet and the vehicle, follow the steps below:
2. Place the ignition into the run position.
3. Navigate with WiTech to RF Hub data and record the tire sensor ID’s to use after the install.
4. Select the “Restore Vehicle Configuration” under the vehicle Preparations menu and follow the WiTech directions.
2. Open hood. Carefully pry off six (6) panel clips from
1. Loosen one (1) 10mm bolt and disconnect
the radiator cover panel. Remove the panel.
negative battery cable
7/28/15
Publicidad
