Auxiliary Mode; Updating Firmware - Tivoli Audio ORB Manual Del Usario

4. You will now see that Bluetooth is playing in the zone, and should hear your music on all speakers
included in the zone.
Your Orb can be used as a standalone speaker. Simply use an 1/8" stereo cable to attach any
line or headphone level source into the AUX input on the back of your speaker. You can control the
volume of the speaker using the volume control on the Orb or using the Tivoli Audio Wireless App.
Please note the Orb cannot send the signal going into the AUX input to any other speakers. If you
wish to do this, refer to the Bluetooth over WiFi section of the Orb manual.
Your Orb will have periodic software updates. It is best to check for these updates when you
first use the product, and about every 4 months after. The app will notify you of new firmware up-
dates, or you can check on the Speaker Configuration page.
To check for updates:
1. In your settings page, go to Devices.
2. Any units that need the latest firmware should be listed. Select the unit you would like to update
in the list.
Bluetooth Mode

Auxiliary Mode

Updating Firmware

English - 22