Tabla de contenido
Publicidad
1.
Prepare the Site
Mounting Plate
Plaque de fixation
Placa de montaje
Determine Sconce Height
Determine the proper height of the sconce, which is dependent upon the height of
the user.
Recommended
Height of User
Sconce Height
5' (1.5 m)
5-1/2' (1.7 m)
6' (1.8 m)
6-1/2' (2 m)
Locate the outlet box based on the selected sconce height.
Install the Mounting Plate
DANGER: Risk of personal injury. To avoid possible electrical shock, the
electricity must be turned off at the circuit breaker or fuse box before attempting
any installation procedure.
If you have not already done so, turn off the electricity at the circuit breaker or
fuse box.
Carefully pull the wiring out from the outlet box and allow the wires to hang
down.
Place the flat side of the mounting plate flat against the outlet box.
Align the mounting holes on the mounting plate with the holes on the outlet box.
Securely tighten the mounting plate to the outlet box with the mounting screws.
Préparer le site
Déterminer la hauteur du chandelier d'applique
Déterminer la hauteur adéquate du chandelier d'applique, en fonction de la taille
de l'utilisateur.
1091827-2-G
Mounting Screw
Vis de fixation
Tornillo de montaje
Center of Mounting Plate to Floor
50" (1270 mm)
52-1/2" (1334 mm)
55" (1397 mm)
57-1/2" (1486 mm)
4
Kohler Co.
Publicidad
Tabla de contenido
