Festo MH1 Instrucciones Para El Usuario página 22

Valve Solenoid
size voltage
1)
MH1 5 V
2)
MH2 5 V
1) with valve types MHA1 or MHP1
2) with valve types MHA2 or MHP2
Controlling the valves
Control the valves in a uniform manner. Preferably, all con
trol signals should be positive−switching (1−switching),
otherwise negative−switching (0−switching). Mixed mode
control is not permitted.
Address assignment of the valves
Assign the addresses in ascending order without gaps.
A valve location always occupies one address.
Counting beginning from left to right (orientation:
position of multipin connection is on the left on the
basis block).
22
Electrical resis
tance on zero
conductor
max. 0.27
max. 0.10
Length of connect
ing cable
max. 5.0 m
max. 2.5 m
0603a
Festo MH.−... English