Axis M11 Serie Guia De Instalacion página 11

LED Indicators
Note
• The Status LED can be configured to be unlit during normal
operation. To configure, go to Setup > System Options > Ports
& Devices > LED. See the online help for more information.
• The Status LED can be configured to flash while an event is
active.
• The Status LED can be configured to flash for identifying the
unit. Go to Setup > System Options > Maintenance .
Status LED
Green
Amber
Note
The Network LED can be disabled so that it does not flash when
there is network traffic. To configure, go to Setup > System
Options > Ports & Devices > LED. See the online help for more
information.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
AXIS M11 Network Camera Series
3
Power connector
4
Control button
5
Network connector
6
Power LED
7
Status LED
8
Network LED
9
microSD card slot
10
Iris connector
11
I/O connector
12 ²
¼ Screw mount
Indication
Steady green for normal operation.
Steady during startup and when
restoring settings.
11