Attaching Front Plate To Screen Using Vesa 75 Or 100 Mm Mounting Patterns - PEERLESS Paramount PP730 Instalación Y Montaje

Using VESA 75 or 100 mm Mounting Patterns
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
Insert two M4 x 12 mm screws (A) into top two holes of
2
screen, leaving approximately .25" (6 mm) of exposed thread.
Hook screws onto keyslots of adapter plate as indicated in
figures 2.1 and 2.2.
*Note: If hole pattern is in a pocket, insert two M4 x 20 mm
screws (B) with two retaining spacers (C) into top two holes of
screen as indicated right.
Insert two M4 screws (A or B) through bottom holes of adapt-
er plate as shown in figure 2.3.
FOR VESA 75
®
MOUNTING PATTERN:
fig. 2.1
WARNING
FOR VESA 100
MOUNTING PATTERN:
*For screens with
a hole pattern in a
pocket, spacers (C) go
between adapter plate
and screen.
Screen may appear
slightly different
than illustrated
fig. 2.2
fig. 2.3
5 of 20
ISSUED: 10-01-07 SHEET #: 095-9272-2 06-15-09
C
A
1/4"
A or B
ADAPTER PLATE
ADAPTER
PLATE