Rowenta IS6200 Instructivo De Operación página 20

The appliance must be descaled at least once a year or after 50 hours of
use.
• To carry out a descaling operation, follow the following steps:
1. Ensure that the appliance has cooled down completely (2 hours mini-
mum).
2. Fill the water tank with fresh water and place it on the main unit
allowing water to fill the boiler.
3. Remove the water tank from the base and empty out the water via the
water tank filling hole by tipping the device over a sink. Limescale and
other residues are thus removed.
4. Repeat step 2 and 3 several times until the scale has been removed.
CAUTION: Don't fill the boiler by the steam head holes !
Never immerse the steam head in water !
TIPS FOR BEST RESULTS WITH YOUR GARMENT STEAMER
• We recommend checking the garment care label for manufacturer re-
commendations before steaming. We also recommend testing the gar-
ment and strength of the color on an unobtrusive area such as an inner
seam.
• Gently pull down on bottom of garment while steaming
• Gently press steamer brush into fabric while making slow passes
• To put crisp edges on pants and shirts, use crease attachment
• Avoid contact between the steam head and silk or velvet.
• Certain garments are smoothed more easily on the reverse side.
• Heavy fabrics may need to be steamed longer.
• If you are using the steam head at a position close to the ground, raise
the hose frequently in order to avoid the formation of condensation. A
gurgling noise may be heard if the flexible pipe is pinched.
• If no steam is produced, if a gurgling sound is heard or if water is drip-
ping through the holes of the steam head, raise the steam hose occa-
sionally to remove condensation inside.
• Be careful at all times.
15