Ryobi RLM46140 Traducción De Las Instrucciones Originales página 12

WARNING
Do not store the product with petrol in the tank inside a
building where fumes may reach an open fl ame or spark.
■ If not using a fuel stabilizer, allow the engine to run until
the product is completely out of petrol.
■ Once the engine has stopped, allow the blade to come
to a complete stop and disconnect the spark plug wire.
■ Turn the product on its side (with carburetor facing up)
and clean grass clippings that have accumulated on the
underside of the mower deck.
■ Clean the underside of the mower deck.
■ Wipe the product clean with a dry cloth.
■ Check all nuts, bolts, knobs, screws, fasteners, etc., for
tightness.
■ Inspect moving parts for damage, breakage, and wear.
Have repairs made on any damaged or missing parts.
■ Store the product in a well-ventilated area that is clean,
dry, and out of the reach of children.
■ Do not store near corrosive materials, such as fertilizer
or rock salt.
To lower the handle before storing:
See figure 18.
■ Remove starter rope from the guide and allow it to
retract into the engine.
■ Remove the grass catcher.
■ Release the upper quick-release fasteners of the upper
handle and fold the upper handle down.
■ Release the lower quick-release fastener.
■ Fold the lower handle forward past the edges of the
handle mounting brackets and make sure that the
bracket supports the handle; otherwise, the air filter
may be damaged.
■ Close the lower quick-release fasteners and let the
bracket support the handle, making sure not to bend or
kink the control cables.
TRANSPORTATION
■ Stop the product, disconnect the spark plug wire and
wait until the blade comes to a complete stop. Allow the
product to cool down.
■ Empty the fuel tank by running the engine until it stops.
Empty oil by following the instruction for changing oil.
■ Secure the product against movement or falling to
prevent injury to persons or damage to the product.
10
English