Tristar MX-4153 Manual De Usuario página 10

Use
Turn the unlock button (no. 5) down and the swivel arm (no. 4) goes up.
See Figure 1 & 2. Place the mix bowl (no. 2) on the plateau and turn it counter clockwise down
as shown in Figure 3.
Figure 1 Figure 2 Figure 3
Place the splash cover (no. 11) on the dough hook, the mixer or beater, whichever attachment
you want to use. Place the required piece in the connector (no. 1) and tighten the connection
clockwise until securely fastened. See Figure 4 & 5.
Figure 4 Figure 5 Figure 6
Turn the unlock button (no. 5) and press down with the other hand the swivel arm (no. 4)
downwards. See Figure 6. The device is ready for use.
Make sure the speed selector (no. 7) to 0 before you plug in into the wall outlet.
Place the desired ingredients in the mixing bowl.
The speed of 1 to 6 can be selected. 1 is the lowest speed and 6 is the highest speed setting.
Using the speed selector (no. 7) for the desired speed.
Select a speed appropriate to the ingredients you use. Add ingredients gradually increasing.
For a short fast operation, select the Pulse mode (P) by the speed selector switch (no. 7) to the
left, you should switch insisting in this position, using up about 1 minutes possible overheating
of the engine. Select the speed selector to 0 when you finish mixing and remove the plug from
the socket.
10