1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 99-5825
  6. Instrucciones de instalación

Metra 99-5825 Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 99-5825
Ford Fiesta 2011-Up
99-5825S, 99-5825B
KIT FEATURES
• ISO DIN radio provision
• Driver information circuits and buttons
• Painted Silver or Matte Black to match factory finish
KIT COMPONENTS
• A) Radio Housing • B) Radio ISO Brackets • C) (6) #8 x 3/8" Phillips truss head screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-5524-NAV Ford interface 2011-up
Antenna Adapter: • 40-EU10 multi-app adapter
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket Wrench • Cutting Tool
METRA. The World's best kits.
APPLICATIONS
C
1-800-221-0932
™
Dash Disassembly
– Ford Fiesta 2011-Up ............................................ 2
Kit Assembly
– ISO DIN radio provision......................................... 3
NOTE: This kit comes pre-programmed for vehicles
equipped with SYNC. It will not operate properly in vehicles
equipped without SYNC unless it is programmed.
Programming for vehicles without SYNC:
1. Turn on the ignition.
2. Press and hold the kit's menu button for
ten seconds.
3. Release the menu button and test the kit's buttons
for proper operation.
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Table of Contents

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra 99-5825

Resumen de contenidos para Metra 99-5825

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-5825 APPLICATIONS Table of Contents Ford Fiesta 2011-Up 99-5825S, 99-5825B Dash Disassembly – Ford Fiesta 2011-Up ..........2 Kit Assembly – ISO DIN radio provision......... 3 KIT FEATURES • ISO DIN radio provision NOTE: This kit comes pre-programmed for vehicles •...

  • Página 2: Dash Disassembly

    99-5825 Dash Disassembly 1. Unsnap and remove the panel 4. Remove two 7 mm hex holding over the display at the top of radio and radio chassis together the dash. (Figure A) (from top of panel). (Figure D) 2. Remove two 7 mm hex screws 5.

  • Página 3: Kit Assembly

    (Figure A) to the radio panel using the harness and antenna plug in the supplied screws. (Figure C) dash. Metra recommends using 2. Mount the ISO brackets to the the proper mating adapters from 4. Mount the factory airbag indicator head unit with the screws supplied Metra and/or AXXESS.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 99-5825 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

  • Página 5: Componentes Del Kit

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5825 APLICACIONES Indice Ford Fiesta 2011Mas 99-5825S, 99-5825B Desmontaje del tablero – Ford Fiesta 20011 y Mas ........2 Ensamble del kit CARACTERÍSTICAS DEL KIT • Provision de radio ISO DIN – Provision de radio ISO DIN ........3 •...

  • Página 6: Desmontaje Del Tablero

    99-5825 Desmontaje del tablero 1. Desenganche y quite el panel que 4. Quite los dos tornillos Torx T-20 y está sobre la pantalla en la parte desenganche las dos rejillas del de arriba del tablero. (Figura A) panel del radio de fábrica.

  • Página 7: Ensamble Del Kit

    Metra recomienda (Figura C) el uso de adaptadores adecuados 2. Monte los soportes ISO en la de acoplamiento de Metra y/o de 4. Monte el indicador de la bolsa de unidad central con los tornillos AXXESS. incluidos con la unidad. (Figura B) aire de fábrica en el panel del radio...
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5825 EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido