After that, the base station will switch to the
During signal reception by the time signal
transmitter, the base station buttons are disabled
(except DOWN and SNOOZE/LIGHT).
Once the signals of sufficient strength have been received
from the time signal transmitter and wireless rain gauge,
the following data will be permanently displayed.
Time and Date
Radio tower symbol
Radio wave symbol
Outdoor temperature OUT
Indoor temperature IN
The base station immediately and automatically switches
to reception several times each night. During this process,
the displayed time is compared with that received from
the time signal transmitter and, if necessary, corrected.
The symbol
after the reception of the time signal indicates
the daylight saving time.
58
DCF reception mode to receive the signal
from the DCF77 time signal transmitter.
The number of radio waves indicates the
reception quality: The more radio waves
shown on the display, the better is the
reception.
WS 1907 digital rain gauge with DCF radio clock
that appears on the display