Charging the gamepad
D
Charge the gamepad for at least 8 hours before using it for
the first time. To do this, proceed as follows:
GB
1. Connect the plug of the AC adapter to the gamepad.
F
2. Connect the AC adapter to a power socket.
Charging will start automatically.
E
Switch the gamepad on/off
I
1. To switch on the gamepad, move the switch on the
back of the gamepad to the "on" position.
Vibration is also switched on in this position.
2. Move the switch to the "Motor off" position to switch
the gamepad on without vibration during play.
3. Move the switch to "off" to switch the gamepad off.
Setting up
This gamepad allows you to use up to four gamepads of the same type simultaneously on four different channels.
To configure the channels, proceed as follows:
1. On the back of the gamepad, select the required
channel, e.g. 1.
2. On the back of the receiver, select the required
channel, e.g. 1.
Important: Note that the channel settings on the
gamepad and receiver must be the same for the
gamepad to work!
12