Publicidad
Idiomas disponibles
Idiomas disponibles
The following table shows which channel setting to select:
Channel setting
Player 1
Gamepad
1
Receiver
1
Connecting to the PlayStation 2 game console:
1. Select the required channel (see "Setting up")
2. Connect the receiver to the gameport of the PlayStation 2.
3. Move the switch on the back of the gamepad to the "On" position for play with vibration or " Motor off"
for play without vibration. ("Off" position switches the gamepad off.)
Connecting to Xbox
1. Select the required channel (see "Setting up")
2. Connect the Xbox/USB adapter to the gameport socket of the receivers.
3. Now connect the Xbox plug to the gameport socket of your Xbox.
4. Move the switch on the back of the gamepad to "On" for play with vibration or "Motor off" for play without
vibration. The "Off" position switches the gamepad off.
Connecting to the PC
System requirements:
• IBM-compatible PC with Pentium II 350 MHz process or higher
• 256MB RAM or more
• At least 1 free USB port
• Windows 98SE/Me/2000/XP
• Direct X 7.1 or higher
Channel setting
Channel setting
Player 2
Player 3
2
3
2
3
13
GB
Channel setting
Player 4
4
4
D
F
E
I
Publicidad
