Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
D
a) Please note that USB mode is not supported by Windows 95/NT.
b) Don't connect the gamepad via a USB hub, only directly to the USB port of the PC.
GB
1. Select the required channel (see "Setting up").
F
2. Connect the Xbox / USB adapter to the gameport socket of the receiver.
3. Now connect the USB plug to the USB port of the PC.
E
4 Move the switch on the back of the gamepad to the "On" position for play with vibration or "Motor off" for play
without vibration. The "Off" position switches the gamepad off.
I
5. A HID driver is installed automatically.
Software installation
1. Insert the supplied CD in your CD-ROM drive.
2. If the installation program does not start automatically, click on "Start/Run/Browse" and
select your CD-ROM drive.
3. Double click on the file "setup.exe".
4. Follow the instructions on the screen.
5. When installation is finished, restart the PC.
Testing the gamepad
1. After driver installation, click on "Start – Control panel – Game Controller ("Gaming options" under Win Me).
Under Windows XP , click in the standard view first on "Printers and other hardware" and then on "Game
controllers".
2. Select "Double Vibration Controller" and click on "Properties". You can test all functions of the gamepad
in this menu.
Configuring Auto-Fire
To intensify fire-power in the game, you can configure the buttons for continuous fire.
1. Hold down the Auto button.
2. Press the button you want to assign Auto-Fire to.
3. Release the Auto-Fire button.
To delete the programming, repeat the above steps.
14
Publicidad
