Tabla De Contenido - 3M Scotch-Weld Easy 250 Manual Del Usuario

Table of Contents
i
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Preheater User's Manual
Important Safety Instructions ......................................................................................................... 1
3M™ Scotch-Weld™ Polyurethane Reactive or (PUR) Easy 250 Adhesive.............................. 1
Adhesive Preheater Operation ................................................................................................ 1
Grounding Instructions .................................................................................................................. 2
Instructions for Use.....................................................................................................................3-5
Troubleshooting ........................................................................................................................... 6
Warranty/Important Notice/Limitation of Remedies/Limitation of Liability ....................................... 7
The 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Preheater has been
designed to warm 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Adhesive Cartridges prior
to use in the 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Adhesive Applicator. The
cartridges should be heated a minimum of 45 minutes prior to use in the applicator. This is
particularly important in high volume usage areas where it is not convenient to allow the
cartridge to warm 45 minutes in the applicator before use. Simply remove preheated cartridges
and load into the applicator as described in the 3M™ Scotch-Weld™ Polyurethane Reactive
(PUR) Adhesive Applicator User's Manual, and begin use.
This user's manual includes information on important safety instructions,
grounding instructions, operating instructions, troubleshooting, and service
procedures. Read the user's manual and become familiar with its contents before
using the preheater.
©3M 2014