Important Safety Instructions; Scotch-Weld™ Polyurethane Reactive Or (Pur) Easy 250 Adhesive - 3M Scotch-Weld Easy 250 Manual Del Usuario

Important Safety Instructions

3M™ Scotch-Weld™ Polyurethane
Reactive (PUR) Easy 250 Adhesive
IMPORTANT: For additional health and safety information, see
product label and Material Safety Data Sheet for Scotch-Weld™
Adhesive used.
WARNING
!
Use only with 3M™ Scotch-Weld™ Polyurethane Reactive
(PUR) Easy 250 Adhesive Cartridges. Use with any other
materials may cause hazardous conditions.
WARNING
!
3M™ Scotch-Weld™ Polyurethane Reactive (PUR)
Adhesive Cartridges should be preheated or used in 3M™
Scotch-Weld™ Polyurethane Reactive (PUR) Preheater or
3M™ Scotch-Weld™ Polyurethane Reactive (PUR)
Adhesive Applicator only. Do not preheat 3M™
Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250
Adhesive Cartridges in ovens or other heating devices or use
in other applicators. May cause hazardous conditions.
WARNING
!
Do not heat or expose 3M™ Scotch-Weld™ Polyurethane
Reactive (PUR) Adhesive to temperatures or surfaces above
275°F (135°C). Vapors of heated material may be
irritating to eyes and respiratory tract and may cause
asthma-like symptoms in persons previously
sensitized to isocyanates.
WARNING
!
Do not clean or remove 3M™ Scotch-Weld™ Polyurethane
Reactive (PUR)Adhesive with heat, flame, or solvent. May
cause hazardous vapor or fire.
WARNING
!
Avoid Contact with flammable materials
©3M 2014
SAVE THESE INSTRUCTIONS
Read all instructions before using this product.
3M™ Scotch-Weld™ Polyurethane Reactive
(PUR) Easy 250 Adhesive Preheater Operation
To reduce the risk of electrical shock or injury while operating
or servicing the 3M™ Scotch-Weld™ Polyurethane Reactive
(PUR) Easy 250 Adhesive Preheater, observe the following
safety rules:
1. Operate and service the applicator only as described
2. Connect the applicator only to a properly grounded
3. Do not unplug the applicator by pulling on the cord.
4. Do not handle the plug or applicator with wet hands.
5. Do not use the applicator outdoors or on wet surfaces.
6. Do not use the applicator with damaged cord or plug.
7. Do not use the applicator if it is not working properly
Use only 3-prong grounded plug and properly grounded
outlet. Failure to use properly grounded plug and outlet may
cause electrical shock.
Important: If you are not sure of proper connections, get help
from a qualified electrician or service person.
Do not use an unapproved extension cord with the applicator.
Use an extension cord which complies with NEC requirements
and state and local codes and other requirements.
Avoid contact with top surface and metal heating chambers of
preheater during use and hot adhesive cartridges and
adhesive. May cause burns.
IMPORTANT: Wear heat resistant gloves and
safety glasses when using.
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Preheater User's Manual
WARNING
!
in this manual.
outlet.
Grasp the plug, not the cord, to unplug.
or has been dropped, damaged, submerged in water,
or left outdoors.
WARNING
!
W ARNING
!
IMPORTANT : Use of an improper extension
cord may cause electrical shock.
Caution
!
1