AQUARAY MultiControl 8 Instrucciones De Operación página 4

Parts List
1. quaRay MultiControl unit
2. quaRay MultiControl PSU
3. Fixing kit
Installation
Self adhesive feet are supplied in the fixing kit and
can be placed in the circular indents on the back
of the unit. They will provide friction when placing
the quaRay MultiControl unit on a horizontal
surface.
The unit can be mounted on a vertical surface
using the screws supplied in the fixing kit. These
engage into the keyhole slots on the back of the
unit.
When mounting the quaRay MultiControl unit,
please make sure there is enough space below to
connect the PSU and lamps.
Once the unit is in position, connect the lamps to
the quaRay MultiControl unit by plugging them
into Outputs 1 - 8. Please note: Channel 1 and
Channel 2 are controlled independently of each
other.
Then connect the PSU to the quaRay
MultiControl unit by plugging it into the Input.
2