AQUARAY MultiControl 8 Instrucciones De Operación página 9

Maintenance
Caution: To avoid possible electric shock, special
care should be taken when using this appliance
near water.
Caution: lways isolate the PSU from the mains
electricity before carrying out any maintenance on
your quaRay set up.
The quaRay MultiControl unit is not a customer
serviceable part.
Caution: Do not attempt to open the plastic
case of the quaRay MultiControl unit. This will
invalidate the guarantee.
The quaRay MultiControl unit should need little
or no maintenance once set up. However
occasional cleaning may be necessary. This can be
done with a warm damp cloth.
Troubleshooting
Problem: The quaRay MultiControl Unit does
not switch on.
Solution: Check cable connection between PSU and
controller.
Solution: Check power cord is firmly connected to PSU.
Solution: Check (and replace if necessary) the
fuse in the PSU's power cord plug (UK only).
If the controller still does not switch on, return the
unit to your local stockist for further testing and
replacement if necessary.
Problem: The quaRay MultiControl Unit
does not control the lamp units.
Solution: Check the connection between the
lamp units and the quaRay MultiControl unit.
Solution: Check the program settings.
If the controller still does not control the lamp
units, return the unit to your local stockist for
further testing and replacement if necessary.
7